Half Assembled All-aluminum Athorbot Couple M20 3D Printer, 2-in-1 extruder, print single color, dual color, mixed color and graded color


10 items left


 Product features

  • This multifunctional printer equals 4 different printers, which not only can print single color and dual color, but also support to print mixed color and graded color. This printer ships fully assembled and has already been calibrated at the factory. (Only few screws are required to use.)
  • Mixed color: Upload the "Athorbot mix" firmware and it provides different functions to make mixing color by changing the mixing percentage on the LCD screen. Percentage 100 and 0 means single color.
  • Dual color: Upload the "Athorbot dual" firmware and it helps you to print samples with two different colors. Single color is also supported by this firmware.
  • Graded color: Upload the "Athorbot mix" firmware and you can print samples with graded color by changing the mixing percentage on the LCD screen.
  • VIP membership is guaranteed to get plenty of tutorials and 3D printing applications. Free troubleshooting and webinars are available every month. This DIY 3D printer are guaranteed for one year warranty. is 1 year technical support is guaranteed. Quality Assurance/Technical Assistance at athorbot.com| Email at support@athorbot.com | Live chat Skype: ghj205 Mon through Fri 6am - 5pm PST.


New Brand on Amazon but long history of being a 3D printer manufacturer

Athorbot is a new brand in the 3D printer market. But we have been an 3D printer manufacturer for more than 3 years.

We have Couple serial:

  1.  Couple kit: Only 2-in-1 nozzle, two extruder motors which can be used to upgrade different DIY3D printers, such as CR-10, CR-10S, HICTOP, Anet E10, Anet A8, Anycubic 3D printers, etc.
  2. Couple Buddy: Half-assembled with all METAL FRAME.
  3. Couple M10: Self-assembled (DIY) with ALUMINUM FRAME.
  4. Couple M20: Half-assembled with all Aluminum FRAME.

All couple series can print: Mixed color, dual color, graded color and single color. 


Extruder, Nozzle suite and Wire were assembled before shipping. Wires are already connected to the control board & cables are also attached.


PLA, ABS, Wood, TPU, PVA, Nylon, HIPS, etc.

Printing volume:

11.8" x 11.8" x 11.8" (300*300*300mm)


Heated Bed: 3mm aluminum alloy platform
Temperature: Max 100 degree centigrade
Extruder: Max 250 degree centigrade 
Control board: Support double extruder, such as one nozzle mixer color printing, double nozzle two color printing. 
LCD screen: 2004 LCD Module Control, Interface
Power supply: With UL Certification
Input: 100-240V,
Output: 24V/14.6A
Power cable: with UL Certification and ground line. 

Software: both open-source and commercial software, such as Cura, Repetier-Host, or Simplify 3D, the Maker Select Plus 3D Printer is compatible with Windows, Mac OS X, and Linux. 
















Related Items

Starting this February 2020.  We are moving our Athorbot 3D printers to HICTOP 3D Printers to provide a better solutions and a greater compatibility across all our products. All accounts, warrantees, products and purchases shall be transferred under HICTOP Technologies. For future purchases, please visit: https://www.hic3dprinter.com  

In lieu to this event, we are excited to announce that we are moving into a whole new Athorbot product lines. Introducing the Athorbot Home! Your best friend's new best friend.

Thank you for the 5 years of creativity, building and trust!