Marvin_KeyChain
This model is obtained by mixing two colors with the buddy printer.
Download: Marvin_KeyChain.STL |
1. Debug the machine. |
Belt is tight enough---screw is tight enough---the wire connection is correct---x/y/z axis movement is correct---auto home works fine--- temperature works fine---preheat works fine. |
![]() |
2. Slicing setting |
Mixed color printing: brush in "buddy mix v1.0. Hex". |
![]() |
![]() |
![]() |
Save to Gcode file and copy to the SD card. Setting the Mix_Percent at 0 or 100 during printing. |
|
3. The printing process |
![]() |
4. Result |
Mixed Color (PLA) |
|
5. Conclusion |
Athorbot Buddy Couple 3D printer can print single color, mixed color prints. It can be upgraded to bigger size and used for all samples and projects. |
Leave a comment