This model is obtained by mixing two colors with the brother printer


Download: Lion.STL

1. Debug the machine.

Belt is tight enough---screw is tight enough---the wire connection is correct---x/y/z axis movement is correct---auto home works fine--- temperature works fine---preheat works fine.

2. Slicing setting

Print the PLA slice Settings with the brother color
Mixed color printing: brush "Brother mix v1.0 hex" firmware.

Save to Gcode file and copy to the SD card.

Setting the Mix_Percent at 0 or 100 during printing.

3. The printing process

4. Result

Mix ColorPLA


Leave a comment