Lego lab-Batman-- For the beginner to use Athorbot Buddy, Brother, Couple

 Download: Lego lab-Batman. STL

Lego lab-Batman

1. Introduction

Batman is a fictional superhero appearing published by DC Comics [1]. It has been used a common toy by Lego company. These 3D-printed examples are used for 3D printer beginners who wants to start from beginning to professional printing. The whole section will guide you from machine set-up, slicing setting and expected results.

2.  Machine set-up

Belt is tight enough---screw is tight enough---the wire connection is correct---x/y/z axis movement is correct---auto home works fine--- temperature works fine---preheat works fine.

3.1 Athorbot buddy and brother setting (PLA) 

Single color: Upload the “Athorbot” firmware and it helps you to print samples with single color.

3.2 Athorbot buddy and brother setting (ABS)

3.3 Athorbot couple mix setting (PLA)

Mixed color: Upload the “Athorbot mix” firmware and it provides different functions to make mixing color by changing the mixing percentage on the LCD screen. Percentage 100 and 0 means single color. Graded color: Upload the “Athorbot mix” firmware and you can print samples with graded color by changing the mixing percentage on the LCD screen. 

3.4 Athorbot couple dual setting (PLA)

Dual color: Upload the “Athorbot dual” firmware and it helps you to print samples with two different color. Single color is also supported by this firmware.

4. Results

4.1 Athorbot buddy and brother (PLA)

4.2 Athorbot buddy and brother (ABS)

4.3 Athorbot couple mix (PLA)

4.4 Athorbot couple dual (PLA)

5. Conclusion
Athorbot printer provides print with mixed color, dual color and graded color print. It can be upgraded to bigger size and used for all samples and projects.

6. Supplemental material and reference
[1] https://en.wikipedia.org/wiki/Batman

 



1 Response

Gilles
Gilles

October 17, 2017

Excuse my english
It is possible make mix and dual without change the firmware every time ?

Leave a comment