Jack-o-lantern
This model is obtained by mixing two colors with the brother printer |
Download: Jack-o-lantern. STL |
|
1.Debug the machine |
Belt is tight enough---screw is tight enough---the wire connection is correct---x/y/z axis movement is correct---auto home works fine--- temperature works fine---preheat works fine.
|
![]() |
2. Slicing setting |
Print the PLA slice Settings with the brother color |
![]() |
![]() |
![]() |
Save to Gcode file and copy to the SD card. Setting the Mix_Percent at 0 or 100 during printing.
|
|
3. Result |
Dual Color(PLA) |
Leave a comment